Mid-Range Dehumidifiers
Recusorb R
Recusorb R operates using integrated heat recycling. During the rotor’s regeneration (green), heat is absorbed, and then recycled in the “purge zone”, where incoming air is pre-heated and partly dehumidified. Energy consumption falls and the dry air becomes both drier and cooler compared to other sorption dehumidifiers.
R-60BR
Mid-range industrial desiccant dehumidifiers for medium volume dry air stores and sports halls, museums, small clean rooms and manufacturing processes.
Manufactured in 2333 stainless steel, these units include internal heat recovery, electric reactivation and Auto-Manual mode switching. Pre-wired for simple humidistat control as standard, units are also available for two 2 step binary control (from EH4 2 step controller) or linear capacity control (from EH3 PI controller or BMS control signal).
Dehumidifier R-060BR can also be made a mobile dehumidifier, placed on a wagon, and is used for serious water damages.
4,6 kg/h Dehumidifying capacity at 1000 m³/h - 20°C / 60%RH.
R-51/61R
Mid-range industrial desiccant dehumidifiers for medium volume dry air stores and sports halls, museums, small clean rooms and manufacturing processes.
Manufactured in 2333 stainless steel, these units include internal heat recovery, electric reactivation and Auto-Manual mode switching. Pre-wired for simple humidistat control as standard, units are also available for two 2 step binary control (from EH4 2 step controller) or linear capacity control (from EH3 PI controller or BMS control signal).
R-51 1250 m³/h - 7,3 kg/h and R-61R 1.450 m³/h - 10 kg/h Dehumidifying capacity at 20°C / 60%RH.
RZ-71 - RZ-81 - RZ-101 - RZ-102
Industrial dehumidifiers using desiccant technology, for large warehouses, cold stores, ice rinks and sports halls; chemical, pharmaceutical and confectionery manufacturing processes.
Manufactured in aluzinc, these units include internal heat recovery as standard, and are available with electric, steam or direct fired gas reactivation. Capacity control options include simple On/Off, multi-stepped binary control and full PID linear control.
Owing to the PLC-control the user can have full control over the relative moisture and temperature in the room or construction area. It is possible to receive notification via an SMS from the dehumidifier if for example the set temperature level is exceeded.
RZ-71 2.500 m³/h - 14 kg/h, RZ-81 2.800 m³/h - 19 kg/h, RZ-101 4.500 m³/h - 30 kg/h and RZ-102 7.000 m³/h - 50 kg/h Dehumidifying capacity at 20°C / 60%RH.
RZ-ICE
RZ Ice is a RZ unit specially developed for the dehumidification of ice rinks. This dehumidification unit has a low dry air flow and is fitted with powerful fan units.
Manufactured in aluzinc, these units include internal heat recovery as standard, and are available with electric, steam or direct fired gas reactivation. Capacity control options include simple On/Off, multi-stepped binary control and full PID linear control.
RZ-71 4.500 m³/h - 13,5 kg/h, RZ-81 4.500 m³/h - 19,5 kg/h, RZ-101 9.000 m³/h - 32 kg/h and RZ-102 12.000 m³/h - 54 kg/h Dehumidifying capacity at 20°C / 60%RH.
RZ-Flex
RZ Flex consists of a modular system integrated with an RZ standard dehumidifier. Choose components such as precooling and postcooling, or integral temperature and moisture control.
Tetisan DST supplies a complete unit, which results in simpler planning,
faster commissioning and unequivocal functional responsibility compared with systems built up via several different suppliers. All control functions are tested at the factory prior to delivery.
RZ Flex has been developed for applications requiring complete solutions for dehumidification, with moisture and temperature control. These units can also be fitted with special rotors for environments with special requirements; during pharmaceutical manufacturing, in the plastics industry, the manufacture of food and confectionery, the automotive industry, and others.
RF Series
The RF range is a series of compact dehumidifiers which have been developed to meet the varying needs of the process industry. The RF units are suitable for applications requiring
complete solutions for dehumidifi cation, with moisture and temperature control.
Low energy consumption.
The Recusorb dehumidification principle involves integral heat recovery and hence low energy consumption.
You can choose from electricity, steam or gas for rotor regeneration so that you can always make the most of all energy options open to you. Energy saving systems combined with various options allow you to create a dehumidifier to suit the specific needs of each and every project.
Rotor Options
Seibu Giken DST also offers 4 different rotors for environments with special requirements; during pharmaceutical manufacturing, in the plastics industry, the manufacture of food and confectionery, the automotive industry, and others.
19-90 kg/h Dehumidifying capacity at 20°C / 60%RH.
Consorb CZ
The Consorb principle is normally used at low regeneration temperatures, e.g. if you have surplus heat or when dehumidifying very damp air.
CZ-82, CZ102, CZ102L and CZ104
CZ Consorb units are suitable for high ambient water contents
CZ-82 3.200 m³/h 21 kg/h, CZ-102 5.200 m³/h 36 kg/h, CZ-102L 7.200 m³/h 50 kg/h and CZ-104 8.000 m³/h 65 kg/h Dehumidifying capacity at 20°C / 60%RH.