Small Dehumidifiers

Aquasorb

Aquasorb basically functions as a Consorb but the wet air flow is condensed in an air-chilled condenser instead of being led out. Thanks to the common fan for dry air and cool air, all energy is accumulated in the dry air. Aquasorb has a high dry airflow, which improves the drying effect.

Aquasorb-A-30B/Bp Dehumidifier

Aquasorb A-30B/Bp is a sorption dehumidifier that condenses out the moisture. The chassis is made of stainless steel, which is especially important in condensing units. The rotor is, as always, washable, all energy is accumulated in the dry air. Aquasorb operates at dew-points below 0°C.

0,5 kg/h Dehumidifying capacity at 20°C / 60%RH.

Recusorb DR

Like Recusorb R, Recusorb DR has heat recycling, but has a fan for both the dry airflow and the wet airflow. This makes installation simpler when you require overpressure in the room to be dehumidified. This principle is also suitable when you want to achieve very low dew points.

 

 

DR-10B

DR-010B is a handy dehumidifier that weighs only 12 kg.

All dehumidifiers from DST with the prefix DR are comprised of a single phase unit in stainless steel. 

 

0,5 kg/h Dehumidifying capacity at 190 m³/h - 20°C / 60%RH.

 

DR-010B MH1

DR-010B MH1 is a handy dehumidifier with a built in humidistat which enables easier installation. The unit must be installed in the same room that is being dehumidified.

The humidistat is supplied by company Sauter, which guarantees a high level of reliability.

0,5 kg/h Dehumidifying capacity at 190 m³/h - 20°C / 60%RH.

  

 

 

 

DR-20B 

DR-20B is stainless steel with sturdy handles and robust feet so that the unit is easier to stack. DR-20B is used for example for the dehumidification of military stores, water damaged houses and hydroelectric power stations. They are even used as permanent installations in buildings with mould problems. 

0,8 kg/h Dehumidifying capacity at 330 m³/h - 20°C / 60%RH.

DR-30D

DR-30D is the big brother of the DR-20B but with a larger dehumidifying capacity. DR-30D is used for the dehumidification of water damaged houses and warehouses as well as being used as a permanent installation in buildings with mould problems. 

1,1 kg/h Dehumidifying capacity at 360 m³/h - 20°C / 60%RH.

DR-031C

DR-031C in stainless steel may be used for the dehumidification of warehouses, archives or other smaller spaces. DR-031C dehumidifies according to the Recusorb-principle. 

1,6 kg/h Dehumidifying capacity at 310 m³/h - 20°C / 60%RH.

DR-40 T10 and DR-40 T16

DR-40 T10 is maintenance friendly with components that are easy to strip down. 

DR40 T16A has a powerful dry air flow for effective dehumidification.
Both units are powerful single phase dehumidifier fitted with practical handles and designed wholly in stainless steel with a highly effective SSCR-rotor from Seibu Giken. 

DR-40 T10 have 1,6 kg/h 600 m³/h and DR 40 T16 550 m³/h have 2,3 kg/h Dehumidifying capacity at 20°C / 60%RH.

 

DR-50R

DR-50 is maintenance friendly with components that are easy to strip down. 

DR-50 is perfect for example for dry and chilled storage, water damage restoration and other applications that demands a controlled level of humidity. 

 

2,8 kg/h Dehumidifying capacity at  600 m³/h 20°C / 60%RH.

 

Consorb DC

The Consorb principle is normally used at low regeneration temperatures, e.g. if you have surplus heat or when dehumidifying very damp air.

DC-10

DC-10 weighs only 15 kg and dehumidifies according to the Consorb-principle. The DC-10 dehumidifier is maintenance friendly, has a long lifetime and rust free chassis.

0,6 kg/h Dehumidifying capacity at 190 m³/h - 20°C / 60%RH.

DC-031B

DC-031B is a portable single phase unit in stainless steel. DC-031B dehumidifies according to the Consorb-principle. 

1,4 kg/h Dehumidifying capacity at 300 m³/h - 20°C / 60%RH.

 

 

 

DC-031C 16A

 

DC-031C 16A is a single phase unit in stainless steel. DC-031C dehumidifies according to the Consorb-principle. 

2,1 kg/h Dehumidifying capacity at 490 m³/h - 20°C / 60%RH.

DC-50 R

The DC-50 has a similar housing to the DR-50 but runs with two fans. This unit is the right choice when you need to re-circulate air in a room, and have a big difference in moisture content between room air and outdoor air. 

3 kg/h Dehumidifying capacity at 550 m³/h -  20°C / 60%RH.